|
||||||||
|
This web software allows you to quickly and easily create, edit and save message sequences that can then be sent to a (E)GU128x8T-K612C5 message sign display connected to a serial port. The sequences that are created are stored locally in 'Cookies'. Click on the relevant <more info> links below for more detailed information. |
||||||||
|
Display: (E)GU128X8T-K612C5 |
|
|||||||
| Serial
Port Setup Install a new printer, type 'generic printer'. Set up the interface to the connected COM Port. Set the baud rate and parity to 9600, no parity, 8 data bits, 2 stop bits and no flow control. <more info> |
No | Message Name | Address | Click to Action | ||||
| 1 | ||||||||
| 2 | ||||||||
| 3 | ||||||||
| Web
Browser Set Up From the File drop down, select Page Set Up. Set the paper size to A4, clear the header and footer boxes and set the margins to zero. Ensure that your browser has 'Cookies' enabled. <more info> |
4 | |||||||
| 5 | ||||||||
| 6 | ||||||||
| 7 | ||||||||
| Display
Set Up Use the buttons on the display to set the address to match the sequence message address 00-1F, the baud rate & parity is 9600N and protocol is WEB. <more info> |
8 | |||||||
| 9 | ||||||||
| 10 | ||||||||
| 11 | ||||||||
| Character
Code Conversion Keyboard characters to be converted to display codes. Example: £=7e,#=23 <view font table> |
12 | |||||||
| 13 | ||||||||
| 14 | ||||||||
| 15 | ||||||||
| Send
Direct Message A message can be sent direct to a connected display. Text: Address: |
16 | |||||||
| 17 | ||||||||
| 18 | ||||||||
| 19 | ||||||||
| Help and Updates: www.noritake-itron.com/websign | 20 | |||||||