|
VFD Interface
Cables and Connectors |
|||||
| picture | part number | data | description | dimensions | supporting |
 |
PCB20D20SA |
 |
20 way SIL to DIL conversion PCB - 2.54mm pitch | 50.25 x 14.0mm | VFD glass |
| PCB14D14SA |
|
14 way SIL to DIL conversion PCB - 2.54mm pitch |
35.5 x 14.0mm |
VFD SIL modules | |
 |
RS232INT |
|
RS232 to TTL/CMOS
adapter for T series character modules (line receiver IC only) Can be used with other modules 5V,RX,0V. |
Lead length 95mm |
T series VFD modules |
|
|
RS485INT |
|
RS485 to TTL/CMOS adapter for T series character modules and -K610Ax graphic modules. (line receiver IC only) | Lead length 95mm |
T series GU-K610Ax |
 |
IFCK0759FD-3900A |
|
7 way JST connector to 9 way female D type cable for RS232 and 5V interface on GU-3900 series | Lead length 800mm | GUxx-3900 |
 |
IFCK0659FD-7000A |
|
6 way Molex connector to 9 way female D type cable for RS232 and 5V interface on GU-7000 series | Lead length 800mm |
GUxx-7000 |
 |
IFCK0659FD-K612A |
|
6 way Molex connector to 9 way female D type cable for RS232 and 5V interface on GU-K612A series | Lead length 800mm |
GU-K612Ax MCBK09/10 |
 |
IFCK0659FD-K612C |
|
6 way
Molex connector to 9 way female D type cable for RS232 and 5V
power connector for
GU-800 series. Used with MCBK05/10JRA module. |
Lead length 800mm |
MCBK05/10 + GU-800 series |
 |
CONFP-B3BX-3CPKIT |
|
Power Connector (JST-B3B-XH-A) to suit header on PCB. Supplied with 3 crimps type SXH-001T-0.6 |
GU800 series VFD Modules |
|
 |
CONFP-1825-3P |
|
Power Connector (AMP171825-3) to suit header on PCB |
GU300 series VFD Modules |
|
 |
CONFP-1822-3CPKIT |
|
Power Connector (AMP171822-3) & crimps (AMP170204-1) to suit header on PCB |
T series VFD Modules |
|
| VFD module pre-fitted connector options | ||||
|
Display
modules which are supplied without connectors as standard have the option
to have a connector fitted to meet your request. A range of open frame
pin header configurations are shown below where the option suffix can be
added to the display part number. User specified connection options start
at -x10 which can be boxed / polarized headers, transition cables or
interface modules. The letter 'x' denotes the assembly location: N=USA
K=Europe A=Asia. If gold flash (10um) is required add suffix G. USA
Example: CU20029ECPB-U1J-N07with tin lead and CU20029ECPB-U1J-N07G with
gold. |
||||
 |
 |
 |
 |
 |
| -x01 | -x02 | -x03 | -x04 | -x05 |
 |
 |
 |
 |
CUSTOM OPTIONS |
| -x06 | -x07 | -x08 | -x09 | -x10 >> -x99 |