Infra Red Solutions and Controllers

Infra Red Solutions, Controllers and Accessories

Noritake Itron offers a wide range of controllers and accessories to make the use of their products even easier. From IR keyboards right through to extension cables.

A wide range of pre-fitted connectors for modules without connectors supplied is also offered see below for a variety of generic connectors or contact us about user specific connectors.

If you require any advise or further information on any of these products, please do not hesitate to email us

USB Controller with IR Part: KBR38A-USB2 Features: USB 2.0 compatible Uses Built in Windows drivers Serial COM port mode IR Keyboard interface mode Generic printer emulation mode Serial output interfaces SPI/Async/RS232/RS485 Power and data from USB port ideal for developing/testing external 5V supply option more details...		Drive serial displays and other peripherals	USB Controller with IR Part: KBR38A-USB3 Features: same as KBR38A-USB2 plus parallel output interfaces with i80/M68 bus control more details...	Drive serial or parallel displays and other peripherals

IR Controller Part: KBR38A-1/2/PS2 Features: -1= Async RS232/485+SPI -2= I2C/SPI -PS2= PS2 keyboard interface IR keyboard interface ideal for development/testing Single 5V supply at 15mA more details... KBR38A-1 KBR38A-2 KBR38A-PS2	Stand alone IR interface	IR Keyboard Part: KBC56A-1 Format 56 Keys Size 193x53x23mm Power Supply 3V (2xAAA) IR Interface 38kHz RC5 System Code 00 Range 10m more details...

14 way DIL Connector Part MCBK09GRC Features: 14 way Dual in Line connector Universal controller for LCD Direct control of any display Control and XxY keyboard more details...		14 way DIL Connector Part MCBK10GRC Features: 14 way Dual in Line connector Controls LCD compatible VFD with ASCII code/commands more details...

14 way SIL Connector Part MCBK09HRB Features: 14 way Single in Line connector Universal controller Direct control of any display Control and XxY keyboard more details...		14 way SIL Connector Part MCBK10HRB Features: 14 way Single in Line connector Controls LCD compatible VFD Send ASCII code/commands more details...

GU256x64-3xx Controller Part MCBK05JRA Features: Control GU256X64-3xx range Front panel control 30 keys Single 5V supply more details...		GU-3xx and GU-8xx Controller Part MCBK10JRA Features: Control GU-3xx/8xx range 26 way IDC parallel interface Single 5V supply more details...

20 way SIL to DIL adaptor PCB Part PCB20D20SA Features: 20 way SIL to DIL conversion PCB - 2.54mm pitch 50.25 x 14.0mm Supports: VFD glass more details...		14 way SIL to DIL adaptor PCB Part PCB14D14SA Features: 14 way SIL to DIL conversion PCB - 2.54mm pitch 35.5 x 14.0mm Supports: VFD SIL modules more details...

RS232 adaptor Part RS232INT Features: RS232 to TTL/CMOS adapter Line receiver IC only Lead length 95mm Supports: Itron VFD modules more details...		RS485 adaptor Part RS485INT Features: RS485 to TTL/CMOS adapter Line receiver IC only Lead length 95mm Supports: Itron VFD modules more details...

GU-3900 Series Cable Part IFCK0759FD-3900A Features: 7 way JST connector to 9 way female D type cable for RS232 and 5V power Lead length 800mm Supports: GUxx-3900 more details...		GU-7000 Series Cable Part IFCK0659FD-7000A Features: 6 way Molex connector to 9 way female D type cable for RS232 and 5V power Lead length 800mm Supports: GUxx-7000 more details...

MCBK09/10 + GU-K612A Cable Part IFCK0659FD-K612A Features: 6 way Molex connector to 9 way female D type cable for RS232 and 5V power Lead length 800mm Supports: GU-K612Ax MCBK09/10 more details...		MCBK05/10J+800 Series Cable Part IFCK0659FD-K612C Features: 6 way Molex connector to 9 way female D type cable for RS232 and 5V power Lead length 800mm Supports: MCBK05/10 + GU-800 series more details...

Power Connecter 800 Series Part CONFP-B3BX-3CPKIT Features: Power Housing - JST-B3B-XH-A Crimp Housing - SXH-001T-0.6 Supports:GU800 Series Modules more details...		Power Connecter for T Series Part CONFP-1822-3CPKIT Features: Power Housing - AMP171822-3 Crimp Housing - AMP170204-1 Supports:T Series Modules more details...

VFD module pre-fitted connector options
Display modules which are supplied without connectors as standard have the option to have a connector fitted to meet your request. A range of open frame pin header configurations are shown below where the option suffix can be added to the display part number. User specified connection options start at -x10 which can be boxed / polarized headers, transition cables or interface modules. The letter 'x' denotes the assembly location: N=USA K=Europe A=Asia. If gold flash (10um) is required add suffix G. USA Example: CU20029ECPB-U1J-N07with tin lead and CU20029ECPB-U1J-N07G with gold.

-x01	-x02	-x03	-x04	-x05

				CUSTOM OPTIONS
-x06	-x07	-x08	-x09	-x10 >> -x99

VFD Module Interface System - Low Cost and Easy to Use

USB 2.0 Mini B
RS232 TXD and CTS
SPI Clock Serial
64K On Board Memory
ModMaster Compatible
COM Port emulation
Generic Printer emulation
5V@450mA module power

Get your module running in 5 minutes with this plug and play solution, designed to work with ModMaster or other COM and PRINT applications.
Power is also supplied over the USB port.

The EMCBK31A provides USB to RS232/SPI interfacing and can power a module with 5V up to 450mA via the 9 way D type connector.
Internal non volatile memory allows up to 64K bytes of programming or demonstration software for standalone operation.
Mini USB cable not Included

Datasheets
EMCBK31A	TBA
IFCK31A-PSU1
IFCK31A-610
IFCK31A-7000
IFCK31A-7003
IFCK31A-3900
IFCK31A-PROG6
EMBCK31A KIT

The IFCK31A interface adaptors allow easy interfacing between the EMCBK31A and popular VFD modules via their serial interface connector.
The IFCK31A-PSU1 allows an external power supply connection for modules requiring more than 450mA. Custom font and software hex files can be programmed by the the IFCK31A-PROG6 or -610 depending on the module type.