Active Matrix Graphic VFD Modules                                                                                Noritake Itron
 
  Single 5V Supply
  High Brightness Display 3500cd/m2
 -40°C to +85°C Operating Temperature
   Interfaces - SPI / Parallel / RS232
   ASCII Character Fonts 5x5, 5x7 & 10x14
     
   GW64x16C-K610A TEXT & GRAPHIC MODULE  
     
     
 

GW64x32C-K610A Active Matrix VFD Module       

 
     

 The GW range utilise the active matrix MW series displays to produce a unique low profile and low RFI solution from a single 5V supply with a
 very readable 3500cd/m2  brightness at 2.1 mm character height.
The displayed colour can be achieved using a film or acrylic filter.
Click Part Number below  to view PDF specification.
          
  GW128x32C-K610A  
     

Dots
XxY

Equiv.
Chars

Fine Dot Matrix
Part Number

 Dot Pitch
(mm)		 Display Area
W x H (mm)		 PCB Size
W x H (mm)		 Power V/mA
(All Dots On)		 Built- In
CharGen		 Lum.
cd/m2		 Interface
64 x 16 10 x 2  GW64x16C-K610A 0.3 x 0.3 19.4 x 4.75 55 x 21 5 / 100 3 Sets 3500 SPI/Async.
64 x 32 10 x 4  GW64x32C-K610A  0.3 x 0.3 19.6 x 9.72 55 x 25 5 / 150 4 Sets 3500 SPI/Async.
128 x 32 21 x 4  GW128x32C-K610A 0.3 x 0.3 39.3 x 9.72 75 x 25 5 / 250 4 Sets 3500 SPI/Async.
  

Graphic Dot Matrix Active Matrix VFD Glass                                                                 Noritake Itron

                         

  Active Matrix CIG Driver

MW12832GB
Application Notes

MW12864J
  15V Operating Voltage
  Fast Visual Response
  Wide Viewing Angle
  -40 to +85C Operating Temp
  High Brightness (3500cd/m2)
                    
 The active matrix within these MW series displays is a combination of semiconductor and fine VFD technology. A 16x16 phosphor dot matrix is fabricated on the top surface of a semiconductor chip. The chip integrates memory function and display driver circuits, each having a 256 bit shift register latch. 
This technology has the benefit of not requiring refresh once data is loaded. 
 Click Part Number below  to view PDF specification.

                                  
Dot 
Format		 Part Number Dot Pitch Pattern Area Outer Dimension Drive Conditions
X Y X Y PL PH PT Ef If VDD1 VDD2 IDD2 Ek cd/m2
64 x 16 MW06416DB 0.31 0.31 19.4 4.8 45.0 16.0 5.6  1.4 75.0 5.0 15.0 8.0 0.6  3500
64 x 32

MW06432B

 0.31 0.31 19.4 9.7 45.0 20.5 6.6 1.7 92.0 5.0 15.0 8.0 0.6 3500
128 x 16

MW12816D

 0.31 0.31 38.9 4.8 62.0 16.0 5.6 2.5 55.0 5.0 15.0 14.0 0.6 3500
128 x 32 MW12832GB 0.31 0.31 38.9 9.7 62.0 20.5 6.6 2.5 92.0 5.0 15.0 25.0 0.6 3500
128 x 64

MW12864J

 0.30 0.30 39.3 30.0 63.0 30.0 6.5 2.4 165.0 5.0 15.0 TBD 0.6 3500
192 x 32 MW19232BB 0.31 0.31 59.1 9.7 85.0 20.5 6.6 3.0 125.0 5.0 15.0 33.0 0.6 3500
256 x 16 MW25616N 0.31 0.31 78.0 4.8 102.0 16.0 6.6 4.4 75.0 5.0 15.0 22.0 0.6 3500
256 x 32 MW25632EB 0.31 0.31 78.0 9.7 102.0 20.5 6.6 4.4 92.0 5.0 15.0 44.0 0.6 3500