KEY
 PRODUCT
 RANGES

Noritake Itron has developed more than 150 standard products to meet customer applications.
Each module product range features interface and software command set variants which are defined by the suffix on the end of the part number. Custom designed modifications to hardware and software are possible with minimum quantities dependent on the product type.
 

View Module Comparison Table

  
 5x7 LCD Module Emulation U Series
 

 

  
 

CU16025ECPB-W6J          2 lines of 16 characters
 LCD Interface

  
     
Selectable 4/8 bit M68/i80 Interfaces
 Single 5V DC Supply
 Brightness Control Command
ASCII + Extended + User Fonts
 		 Popular 5x7 Dot Character LCD Emulation with  connector pin 3 optional link to Busy or Hardware Reset.
     
5x7 LCD Module Emulation + Graphics 7806A Series
  Graphics Upgrade for 5x7 LCD or VFD
 Selectable 4/8 bit M68/i80 Interfaces
 SPI / Async Serial as Slave or Host
 Place Cursor on any Pixel.
 Graphic Upload and Draw Commands
 5x5, 5x7, 10x14 ASCII Fonts
 Unique Pass-Through Serial Port Host		 The 7806A series allows you to upgrade to a graphics VFD module with many visually enhancing commands including pixel cursor positioning and add a user host port while retaining backward compatibility for LCD Emulation 
     
Bold Font Character Modules T Series
     
 

CU20045SCPB-KT70AASCII & KATAKANA
5mm High Characters
5VDC Supply @ 350mA

  
     
8 Bit Parallel + Serial Interfaces
Brightness Control Command
 ASCII Character and Command Set
 Single 5V DC Supply
 Easy to Use		 High brightness modules with parallel and serial interfaces. No initialisation is required at power on for most modules.
See 5x7 Bold & Alphanumeric modules.
     
Economy Graphics 7000 Series
Low Cost Sync/Async Interfaces
i80 Parallel + RS232 Option  
 Scalable Font Sets
 4 Data Windows
 Graphics Upload
Scroll and Flash Capability		 Cost effective modules with an intelligent graphic command set providing 11 international font selections.
View Demonstration

See Economy Graphic modules.
     
Active Matrix Graphics GW/MW Series
          
  GW128x32C-K610A   Miniature Active Matrix ULTRA BRIGHT VFD           
     
Phosphor on Chip Technology
 On board voltage only 15V DC
 Very High Brightness
 Ideal for Radio / Medical Applications
Ultra Rugged Construction   		Static drive Active Matrix VFD with low RFI emission and 3500cd/m2 illumination. Serial interfaces.
See GW 600 Series and MW Active Matrix Glass Series.
     
  Flexible Graphics Modules 600 Series
SPI / I2C / Async / Parallel Interfaces
Place Cursor on any Pixel.
 5x5, 5x7, 10x14 and 7x15 Fonts
 ASCII, European and Cyrillic Fonts
Graphics, Scroll and Draw Functions
 8 User I/O / 16 Key Scan Port		 Designed for menu driven instrument applications with pixel based H/V scroll and cursor positioning. RS232 / RS485 Options Packet and buffered operating modes. See 600 Series graphic modules.
     
 High Speed Graphics Modules 800 Series
Parallel / Sync Serial Interfaces
High Speed ASIC - 2us Busy Time
Synchronized Scan Flag
 Shadow Memory Areas
Asian Font Options  		This module range employs a high speed ASIC for graphics control allowing fast animation due to the maximum 2us busy time.
See 800 Series graphic modules
     
  Advanced Graphics Modules 3900 Series

Parallel / RS232 Serial Interfaces
Upload Graphics and Font Sets
ASCII, European and Asian Fonts
Unicode Font Selection Capability
High Speed DMA mode
Scroll and Draw Functions
User Controlled I/O Ports		 Advanced graphic modules with up to 256x128 dots with our widest range of commands, built in fonts, code page sets and memory options. 
See 3900 Series graphic modules.
     

ASCII + Multi-Language Fonts

 7900, 3900 and 8000 Series

ASCII, European and Asian Fonts
Unicode Font Selection in 7900 / 3900
Integrated Scroll Capability		 Asian font capability is now available in many product ranges offering Kanji, Korean and Chinese. Custom fonts available. See Asian Font Modules for more details  
     

Large VFD Modules and Message Signs
     
 

 

  
     
On board message storage and multi-drop addressing with RS232 / RS485 interfaces.
See Large Graphic Modules  or Boxed Systems.
     
Custom Design VFD


Automotive, consumer and industrial applications benefit from Customized Glass. Simplify your design path and overall cost by integrating front panel switches, LEDS and interfaces into a Custom Module.

 

Standard Character VFD Glass

Standard Graphic VFD Glass

Interface Accessories

Module Starter Kits

7/14 segment and 5x7 dot
Character VFD glass

Dot Graphic VFD glass
with CIG driver

A range of Interface Modules
and cables

Starter kits for popular
VFD modules
     
Enhance VFDs with optical coloured filters
  
FREE Development Software System - Get your VFD Module Starter Kit running in 10 minutes. Click here to view and download